- Category: Ritual Tool Crafts
- Contributor: Admin
- Date Added: 08/05/2007
- Comments: 0 (0 pending)
- Emailed: 0 times.
- Printed: 1547 times.
- Rating: 5
- Views: 1098
an oblong bead
approx. 9" chain (a broken necklace will work great)
one pin head wire (found in bead stores)
two small beads
Thread the beads onto the pin head wire in this order: small bead, oblong bead, small bead. With the clippers, clip off remaining wire, leaving approx. 3/4" remaining.
Using the needlenose pliers, bend the wire holding the beads into a ring and clamp. Open a link on one end of your chain, and thread through the loop you just made. Clamp shut using the pliers. Open the link on the opposite end of your chain,loop through the pendant. Clamp shut.
To use the Pendulum, hold the pendant in your hand loosely,elbow on the table, letting the pendulum swing free. Still the movements of the pendulum with your other hand. Ask the pendulum to show you "yes" - the pendulum should start to move in a pattern, usually in a circle or back or forth. If you can't really tell, ask the pendulum to be more precise. Once a pattern is established, this is the Pendulum's "yes." Now, ask the pendulum to show you "no." Keep your pendulum in a safe place, and it will treat you well!
There are no comments at this time.
Email Pendulum to a Friend
Comment on Pendulum
Only members are allowed to leave comments.